With Adam's help, I installed a AN832-4D Union and the AN924-4D Nut and hooked up the fuel return line on the firewall per a Jim Cone post. Placed the nut under the shelf per Jim. Not exactly per the plans BUT on GOOD advice. Was easy with the rudder pedals off. The union and nut were supplied with the finishing kit and were originally intended for the fuel tank. I will have to order both for the fuel tank assembly. EASIER NOW THAN LATER!! Taking it slow. Want to see all of the problems with the finishing kit before jumping in feet first. Lots of plans revisons today, took them on a flash drive to Staples and had 16 pages printed to 11x17" for $2.50.
Time Today - 1 hour
